Triton SB-Logger Guide

The guide is in several sections, click the appropriate link.

Logging data in SB-Logger with the Edgetech FSSB sonars

Describes the connection of SB-Logger to an Edgetech FSSB sonar, (FSSB includes all recent Edgetech chirp sub bottom profiling systems 242, 512i, 2400 etc.)

Logging data in SB-Logger with the Benthos ChirpIII and C3D Sub Bottom profilers

Describes the connection of SB-Logger to Benthos Chirp III and C3D Sub Bottom sonars

Setting up the Analog server

Describes setting up the analog interface to SB-Logger (Any analog sub-bottom profiler that requires a trigger and sends the data to SB-Logger as an analog signal)

Playing back data in SB-Logger

Playback options gain filtering stacking etc.

Installing the National Instruments hardware and drivers.

Installing the National Instruments 4474 DAQ board and drivers and the NI 6601 counter timer board used for the triggering both SB-Logger and the source.

Setting up a typical combined Side-Scan and Sub Bottom system.

Detailed description of a typical setup of a combined SSS and SBP system using Isis to log the Side-Scan imagery as an XTF file and SB-Logger to log the SBP data as a SEGY file.   Includes navigation interfacing for both applications.